Scan schedules
A schedule runs a full-site scan on a regular cadence, so problems a release introduces show up without anyone remembering to scan. Each site has one schedule. Scheduled scans never count against your page checks.
How often
Section titled “How often”| Plan | Cadences you can choose |
|---|---|
| Starter | Weekly, on one day |
| Growth | Weekly or daily |
| Pro | Weekly or daily |
| Enterprise | Weekly, daily or custom |
- Weekly runs on the day of the week you pick. On Starter that is one day; on Growth and above you can pick several.
- Daily runs every day.
- Custom (Enterprise) runs up to 4 times a day, at the times you pick (at least an hour apart), on the days you pick. For example, 09:00 and 17:00 on weekdays.
Scans you start yourself (Scan full site, Scan a single page, a deploy webhook or Verify now) are never limited by the schedule.
Set a schedule
Section titled “Set a schedule”Whoever adds a site can choose its schedule as the last step of adding it. After that, owners and admins set, pause and remove it:
- Open the site, then Settings in its sidebar.
- In Scheduled scans, choose the Frequency, the Time and the Timezone, and for weekly scans the Day (Starter) or Days. For a custom schedule, add up to four Times with Add a time and pick its Days.
- Choose Create schedule (or Save schedule to change one).
The card then shows the schedule, for example Weekly on Mon at 09:00 Europe/London or Custom on Mon, Tue, Wed, Thu, Fri at 09:00, 17:00 Europe/London, and when the next scan will run. Times are in the schedule’s timezone.
A Starter weekly schedule saved on several days before the one-day limit keeps its first day.
Start times
Section titled “Start times”Scans start at the time you pick (each of them, on a custom schedule), or up to 30 minutes after it, never before. We stagger start times so that sites scheduled for the same time don’t all begin at once; your site keeps the same offset every run, and the card says what it is. Daylight-saving changes are handled for you.
If a scan of the site is still running when the schedule comes due, the scheduled scan waits and starts once it finishes. A workspace runs at most three full-site scans at a time, so on a workspace with many sites on the same schedule, some start a few minutes later.
What a scheduled scan covers
Section titled “What a scheduled scan covers”A scheduled scan is the same full-site scan as Scan full site on the site’s overview:
- it finds the site’s pages the way the site’s Discovery settings say (sitemap, your manual list of URLs, or both, and following links if that is turned on), up to Max pages per scan;
- it scans each page in a real browser with the site’s rules, its signed-in scanning credentials if it has them, and its interaction scenarios on Growth and above;
- it compares the results with the previous scan and updates issues. An issue it does not find reads Not seen in the last scan and stays open; the next scan that does not find it marks it verified, including one waiting for verification. Findings can come and go between scans of an unchanged page, so one scan is not proof. On a weekly schedule, that second scan is a week later unless you run one sooner;
- afterwards, journeys set to Run automatically after each full-site scan run (Pro and Enterprise), and so does the AI Deep Audit if it is turned on for the site.
Page checks
Section titled “Page checks”Scheduled scans and fix-verification scans are free monitoring: they never count toward your plan’s monthly page-check allowance, however many pages they scan. Scans you start yourself, with Scan full site, Scan a single page or a webhook, do count. Settings → Usage shows the month’s count.
Pause or remove
Section titled “Pause or remove”- Pause: turn off the Schedule active switch on the card. The schedule is kept but nothing runs or queues while it is paused. Turn it back on to resume.
- Remove: Remove schedule deletes it. The site then scans only when you start a scan.
We pause a schedule ourselves only when the workspace’s subscription lapses. The card then shows paused: subscription lapsed. Restore billing in Settings → Billing and the schedule switches back on by itself. Owners get an email when it happens.
If you change plan
Section titled “If you change plan”Moving to a plan that scans less often never stops your monitoring. A schedule that runs more often than the new plan allows keeps running, changed to fit the new plan, in the same timezone and at the same time of day (a custom schedule keeps its first time):
| Schedule | On Starter | On Growth or Pro |
|---|---|---|
| Weekly on several days | Weekly on its first day (Sunday comes first) | Unchanged |
| Daily | Weekly, on the day its next scan was due | Unchanged |
| Custom on chosen days | Weekly on its first day, at its first time | Weekly on the same days, at its first time |
| Custom every day | Weekly, on the day its next scan was due, at its first time | Daily, at its first time |
For example, a daily 09:00 Europe/London schedule whose next scan was due on a Tuesday becomes Weekly on Tue at 09:00 Europe/London, and that Tuesday scan still runs.
Owners get an email listing each schedule that changed, with what it ran as and what it runs as now. Choose another day or time in the site’s Settings whenever you like.
Upgrading later puts each changed schedule back as it ran before, or as close as the new plan allows: a custom schedule changed on Starter comes back on Growth as the table’s last column says. A schedule you changed yourself in between keeps what you chose.
What you hear about
Section titled “What you hear about”A scheduled scan finishing sends the same alerts as any other scan, to whatever channels you have set up in Settings → Notifications → Channels & rules:
- Scan Completed when it finishes;
- Regression Detected when it finds problems the previous comparable scan did not have;
- Scan Failed when it could not complete.
The weekly digest sums up the week’s scans, new and resolved issues, the top open issues and what each site’s review has done, with the change since last week, for owners every Monday morning, and for anyone else who opts in. See Webhooks and alerts to set up channels.